# Foundry & Field

> Manufacturing capabilities and standard products.


## Pages

- [My Account](https://mfggroup.kristibeisecker.com/my-account-2/)
- [Checkout](https://mfggroup.kristibeisecker.com/checkout-2/)
- [Cart](https://mfggroup.kristibeisecker.com/cart-2/)
- [Contact](https://mfggroup.kristibeisecker.com/contact/)
- [News](https://mfggroup.kristibeisecker.com/news/)
- [Capabilities](https://mfggroup.kristibeisecker.com/capabilities/)
- [About](https://mfggroup.kristibeisecker.com/about/)
- [Home](https://mfggroup.kristibeisecker.com/)
- [My account](https://mfggroup.kristibeisecker.com/my-account/)
- [Checkout](https://mfggroup.kristibeisecker.com/checkout/)
- [Cart](https://mfggroup.kristibeisecker.com/cart/)
- [Shop](https://mfggroup.kristibeisecker.com/shop/)

## Products

- [Fixture Stop Block](https://mfggroup.kristibeisecker.com/product/fixture-stop-block/): A 1018 steel stop block measuring 50 × 25 × 15 mm, with two tapped M6 mounting holes and a square machined face. It gives jigs and workholding setups a durable, replaceable reference point.
- [Precision Spacer Set](https://mfggroup.kristibeisecker.com/product/precision-spacer-set/): A set of four 6061 aluminum spacers, each 20 mm outside diameter, 10 mm inside diameter, and 5 mm thick. Use them to establish repeatable gaps or align bolted plates and fixtures.
- [Welded Angle Bracket](https://mfggroup.kristibeisecker.com/product/welded-angle-bracket/): A 3 mm 304 stainless steel angle bracket, welded at the corner and drilled with two mounting holes on each face. It supports compact equipment mounts, guards, and shop-built frames.
- [Stainless Clevis Pin](https://mfggroup.kristibeisecker.com/product/stainless-clevis-pin/): An 8 mm diameter, 40 mm long clevis pin turned from 304 stainless steel, with a cross-drilled hole and retaining cotter pin included. It makes a removable pivot connection for linkages, guards, and brackets.
- [Low-Profile Shaft Collar](https://mfggroup.kristibeisecker.com/product/low-profile-shaft-collar/): A split shaft collar machined from 1018 steel for a 20 mm shaft, with a low-profile body and clamping screw. It provides a repositionable stop or locating point on rotating and linear equipment.
- [Turned Steel Standoff](https://mfggroup.kristibeisecker.com/product/turned-steel-standoff/): A 303 stainless steel standoff with a 25 mm body length and M6 female threads at both ends. It holds panels and components at a fixed spacing in equipment housings and assemblies.
- [Field Clamp Block](https://mfggroup.kristibeisecker.com/product/field-clamp-block/): A split clamp block machined from 6061 aluminum, sized for a 12 mm round shaft and supplied with an M6 clamp screw. It secures a shaft in jigs, test rigs, or light-duty positioning assemblies.
- [Gridline Mounting Plate](https://mfggroup.kristibeisecker.com/product/gridline-mounting-plate/): A 6061 aluminum mounting plate, 100 × 60 × 6 mm, with four countersunk mounting holes and a clean machined finish. Use it as a compact base for fixtures, sensors, and custom assemblies.


[comment]: # (Generated by Hostinger Tools Plugin)